粘度等级
充分利用黑色的粘度等级是建造在倒塌塔顶的炼油厂的复制品。保持其紧实、坚硬和紧密空气的特性是热塑性的塞莫皮莱和这种沥青所具有的特性。这种特性，这种沥青与其他物质的结合，使道路更加持久。
沥青粘度分析 VG10
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.01 | Min: 1.01 - Max: 3pa.s | ISIRI 2956 - ASTM D70 |
| Absolute Viscosity @60 cc poises.min | 1092 | Min: 800 - Max: --- | ASTM D2171 |
| Penetration @25 cc-100gr-5s | 91.6 | Min: 80 - Max: --- | ISIRI 2950 - ASTM D5 |
| Softening Point | 46 | Min: 45 - Max: --- | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.98 | Min: 99.5 - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: 1.00% | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 322 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.03 | Min: --- - Max: 5000 k Pa | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.4 | Min: --- - Max: 300 M Pa | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
沥青粘度分析 VG20
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.01 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Absolute Viscosity @60 cc poises.min | 2091 | Min: 1600 - Max: 2400 | ASTM D2171 |
| Penetration @25 cc-100gr-5s | 65.3 | Min: 60 - Max: 70 | ISIRI 2950 - ASTM D5 |
| Softening Point | 49.6 | Min: 46 - Max: 52 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.98 | Min: 99.5 - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 322 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.01 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.3 | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
沥青粘度分析 VG30
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.02 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Absolute Viscosity @60 cc poises.min | 3200 | Min: 2400 - Max: 3600 | ASTM D2171 |
| Penetration @25 cc-100gr-5s | 52.6 | Min: 50 - Max: 70 | ISIRI 2950 - ASTM D5 |
| Softening Point | 52.4 | Min: 52 - Max: 56 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.98 | Min: 99.5 - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 132 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.05 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.2 | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
沥青粘度分析 VG40
| Test Title | Result | Standard range | TEST Method |
|---|---|---|---|
| SP gr @25/25 cc | 1.03 | Min: 1.01 - Max: 1.06 | ISIRI 2956 - ASTM D70 |
| Absolute Viscosity @60 cc poises.min | 4400 | Min: 3200 - Max: 4800 | ASTM D2171 |
| Penetration @25 cc-100gr-5s | 45.7 | Min: 40 - Max: 50 | ISIRI 2950 - ASTM D5 |
| Softening Point | 53.6 | Min: 52 - Max: 56 | ISIRI 3868 - ASTM D36 |
| Solubility in Trichloroethylene (bitumen content) | 99.98 | Min: 99.5 - Max: --- | ISIRI 2953 - ASTM D4 |
| Ductility @25 cc cm | >100 | Min: 100 - Max: --- | ISIRI 3866 - ASTM D113 |
| Flash Point cc | 132 | Min: 232 - Max: --- | ISIRI 1175 - ASTM D92 |
| Loss On heating w t% | 0.05 | Min: --- - Max: 0.2 | ISIRI 2957 - ASTM D6 |
| Drop Penetration after loss on heat | 8.2 | Min: --- - Max: 20 | ISIRI 2950 - ASTM D6 & D5 |
| Spot Test | Negative | Negative | ISIRI 2949 |
